Ik gebruik mijn ucd's gebruik zonder voorversteker. Bij sommige zacht opgenomen nummers is het volume net onvoldoende. Nu denk ik erover om de versterkeringsfactor van de Ucd's te verhogen met zo'n 4 a 5 db.
Heeft iemand dat al eens gedaan?
Graag zou ik het resultaat weten en welke weerstandswaarden gebruikt zijn?
bedankt.
ophogen versterkingsfactor UCD180
Moderator: Beheerdersteam
Barry, dit staat op de Hypex site:
Changing gain involves no more than changing Rg. Until
recently, all modules were stuffed with Rf=1k and Rg=560Ω. At
the time of writing this is being changed to 2.2k and 1.2k.
To verify which values are used on your module, the position
numbers for Rf and Rg on the various modules are:
Model Rf Rg
UcD700 R58, R59 R57
UcD400 R4, R14 R3
UcD180 R11, R12 R10
Changing gain involves no more than changing Rg. Until
recently, all modules were stuffed with Rf=1k and Rg=560Ω. At
the time of writing this is being changed to 2.2k and 1.2k.
To verify which values are used on your module, the position
numbers for Rf and Rg on the various modules are:
Model Rf Rg
UcD700 R58, R59 R57
UcD400 R4, R14 R3
UcD180 R11, R12 R10
