Speaker Guru interview serie.
Geplaatst: vr 12 sep 2008, 18:46
Hoi,
Ik ben van plan de speaker guru interview serie voortzetten. Deze:
http://members.aol.com/_ht_a/pjay99/
Hier staan onder andere interviews met; Vance Dickason, Linkwitz en anderen.
Ik wil de vragen voorleggen aan o.a: Tony Gee, Bernd Timmermans, Joachim Gerhard, Allan Isaksen, Troels Gravesen. En ze publiceren op Caps&Coils.
Als iemand nog een sterke vraag heeft? Of een idee wie ik de lijst npg meer kan voorleggen? Graag commentaar. Ik wil de vragenlijst wel enigzins overzichtelijk houden. Maar 2 of drie vragen kunnen er makkelijk bij.
Dit is de oude vragenlijst. Ik heb er een paar nieuwe bijgezet.
Speaker Designer Questions
Short bio
-What was the first speaker you build? And how did you get involved in speakerdesign or the audiofield?
-Can you tell us some more about your favorite music? Do you have special pieces of music you use to review loudspeakers?
-Without giving the standard “weakest link” answer, how important would you rate speakers as component?
-How have speakers changed in the past ten years?
-How about mechanical resistance in loudspeaker drivers. QMS and Rms. Important or overrated?
-Do we have to spend a lot on woofers and tweeters to get good sound?
-Do we have to spend a lot on capacitors and coils in the crossover to get good sound?
-About loudspeaker cabinets. Any thought on the use of exotic materials other than mdf?
-What are the top three design parameters you use? (or the top three things you worry about most)
-Do you design on measurement or sound?
-What do you think about dynamics? Must a speaker really be able to do 115 dB to be any good. Or is this overrated?
-What do you think is that "special something" is that makes some speakers sound so good?
-How many octaves does a speaker really need to sound right? Is the bottom octave required? What about above 20K?
-You have to choose: minimalist twoway monitor or a 4 way active loudspeaker. Which do you bring to the deserted Island?
-What one piece of advice you would like to give to every new speaker builder?
-Will we ever find the Holy Grail in sound reproduction? And what keeps us away from reaching this goal?
-So which is it for you, tubes or Solid State?
-Any thoughts on the audio industry's movement to the far east? -What does the future hold for speaker design?
-Will high end stereo be alive in twenty years?
-Can you name some loudspeaker designs you like? Commercial or DIY.
-And the final question, can you tell me were you are working on at the moment?
Vriendelijke groet
Roland
Ik ben van plan de speaker guru interview serie voortzetten. Deze:
http://members.aol.com/_ht_a/pjay99/
Hier staan onder andere interviews met; Vance Dickason, Linkwitz en anderen.
Ik wil de vragen voorleggen aan o.a: Tony Gee, Bernd Timmermans, Joachim Gerhard, Allan Isaksen, Troels Gravesen. En ze publiceren op Caps&Coils.
Als iemand nog een sterke vraag heeft? Of een idee wie ik de lijst npg meer kan voorleggen? Graag commentaar. Ik wil de vragenlijst wel enigzins overzichtelijk houden. Maar 2 of drie vragen kunnen er makkelijk bij.
Dit is de oude vragenlijst. Ik heb er een paar nieuwe bijgezet.
Speaker Designer Questions
Short bio
-What was the first speaker you build? And how did you get involved in speakerdesign or the audiofield?
-Can you tell us some more about your favorite music? Do you have special pieces of music you use to review loudspeakers?
-Without giving the standard “weakest link” answer, how important would you rate speakers as component?
-How have speakers changed in the past ten years?
-How about mechanical resistance in loudspeaker drivers. QMS and Rms. Important or overrated?
-Do we have to spend a lot on woofers and tweeters to get good sound?
-Do we have to spend a lot on capacitors and coils in the crossover to get good sound?
-About loudspeaker cabinets. Any thought on the use of exotic materials other than mdf?
-What are the top three design parameters you use? (or the top three things you worry about most)
-Do you design on measurement or sound?
-What do you think about dynamics? Must a speaker really be able to do 115 dB to be any good. Or is this overrated?
-What do you think is that "special something" is that makes some speakers sound so good?
-How many octaves does a speaker really need to sound right? Is the bottom octave required? What about above 20K?
-You have to choose: minimalist twoway monitor or a 4 way active loudspeaker. Which do you bring to the deserted Island?
-What one piece of advice you would like to give to every new speaker builder?
-Will we ever find the Holy Grail in sound reproduction? And what keeps us away from reaching this goal?
-So which is it for you, tubes or Solid State?
-Any thoughts on the audio industry's movement to the far east? -What does the future hold for speaker design?
-Will high end stereo be alive in twenty years?
-Can you name some loudspeaker designs you like? Commercial or DIY.
-And the final question, can you tell me were you are working on at the moment?
Vriendelijke groet
Roland
. De naam Guru stond al vast door die eerdere reeks interviews. Ik heb net ook een mailtje binnen van PJay die de originele serie interviews begonnen is. Die is ook enthousiast en heeft er helemaal geen problemen mee als ik er verder ga met zijn idee 
.